In modern conference and seminar rooms we often find different appliances like notebooks, BluRay or DVD players. When it comes down to properly adapting the different input signals to the resolution and aspect ratio of a beamer or display, the DVM-HDB-SCAL is precisely the right decision. It shines not only with short and hasslefree switching times, but also with a great connectivity. For instance, remote camera and video signals can be loaded via the HDBaseT input. And you can easily route the analogue inputs (CV, YPrPb) to an HDMI and a 100 m / 328 ft. HDBaseT output.

By the way: the DVM-HDB-SCAL is also locally controllable or via RS232 or ethernet respectively. And its integrated 2 x 20 W audio amplifier can be fed from all inputs, independently of the video signal. For this purpose simply use the audio signals from the HDMI inputs, the DisplayPort or locally connected signals.

DVM-HDBT-SCAL features:
• 9 video inputs:
3 x HDMI ®
1 x DisplayPort
1 x HDBaseT (100 m / 328 ft.)
2 x VGA (SUB-D15HD)
1 x YUV/YPrPb (3 x RCA)
1 x Composite (1 x RCA)

• 9 analogue stereo audio inputs

• support of Embedded Audio in HDMI ® and DisplayPort

• 2 video outputs:
1 x HDMI ®
1 x HDBaseT (100 m / 328 ft.)

• supported input & output resolution up to WUXGA (1920 x 1200)

• supports HDMI ® 1.4 and HDCP 1.4

• integrated EDID management

• integrated audio amplifier with 2 x 20 W @ 4 Ω

• 10/100BaseT Ethernet connection

• RS232 connection (DSUB9)

• fast switching time

• built-in wide-range power supply for worldwide operation

• 19“ / 1 HU housing, 230 mm / 9.06” deep, 3.8 kg / 8.4 lbs